How To Use The BioLong Device

How To Use The BioLong Device

The BioLong is an advanced home device that combines Galvanic Current, Sonic, and LED Light Therapy. This device is an all in one solution for all skin types and skin concerns with absolutely no side effects.


Consistency using your BioLong device at home has many benefits such as:

  • Enhances your complexion
  • Improves blood circulation and cell renewal
  • Increases collagen and elastin production
  • Makes the area around your eyes look younger
  • Improves the appearance of wrinkles and fine lines
  • Gently cleanses the skin’s pores by removing dirt and oil
  • Massages your face with gentle sonic for muscle relief and relaxation
  • Improves the skin’s nourishment and helps retain its moisture
  • Encourages healthy-looking skin while enhancing its natural beauty

BioLong Technologies

#1. Sonic

Tightens and tones the skin with muscle relief and relaxation. Sonic uses high-frequency electrical impulses to pass into our skin and reach the facial muscles. We have 43 facial muscles, and over time these muscles overwork and start to loosen, shorten and shrink, causing deep unwanted expression lines.

Sonic is a facial work out

Example: You’re on a healthy diet and lose 20 pounds. The weight is gone, but now you have loose and saggy skin. BUT – if you’re on a healthy diet and combine it with exercise, you will lose weight and also have a tight and toned body.

Aging Skin

Facial muscles work in a similar way because they’re made from the protein elastin. Working to strengthen your elastin is essential because it’s the connective tissue that allows your skin to stretch and bounce back. Elastin helps skin to return to its original position when it is poked or pinched.

With Sonic technology, you can contour, firm, and tighten the skin by activating the electrodes and stretching the muscles.

Sonic technology

#2. Galvanic Current (+,- Ions)

There are two types of Galvanic Current: Positive ION (+) and Negative ION (-)

Ions are molecules that have gained or lost an electrical charge.

Galvanic Current is a low-level, continuous current that flows in one direction. It’s a well-known technology that’s been used in the medical field for decades. It’s most famous for treating inflammatory arthritis, joint pain, rheumatism, and overactive sweat glands.

How galvanic iontophorensis treatments work

Galvanic Ion (+): Helps with deep cleansing, removes blocked glands and detoxifies by attracting and breaking down negatively charged toxins and other impurities.

Dirt can be hidden deep in the cortex of the skin, and it’s hard to get rid of it with ordinary cleaning products. When positive ions are activated, the magnetic head generates dominant positive ions to attract the dirt then softens the structures around the impurities by exerting electrostatic pressure on them. Dirt is then pulled from the lower layers of the skin and comes to the surface, ready to be cleansed.


  • Boosts blood circulation & oxygen levels
  • Helps in preventing acne
  • Improves complexion
  • Calms & soothes the skin

Galvanic Ion (-): Helps penetrate product up to 60% deeper.

A large number of negative ions are generated and bind with the positive ions in the skin cells. Negative ions enable the nutrients in skincare products to reach into the deeper layers of the skin. With nutrients being so deep into the skin, the upper layers of the skin are directly nourished.


  • Strengthening the functions of autonomic nerves
  • Reinforcing collagen production
  • Improving the permeability of the cell’s prototype plasma membranes
  • Strengthening the body’s immune system

 Galvanic current

#3. LED Light Therapy

Red LED light is considered the anti-aging light and helps with circulation. It improves skin cell activity, pigmentation, collagen stimulation, rejuvenating skin, wrinkles, shrinks pore size, and healing wounds.

Blue LED light is considered the anti-bacterial light and helps control acne. It’s going to reduce pimples, blemishes, inflammation, and scars, improve oil control, skin rashes, and heal the skin.

Red LED light therapy


Red light LEDs were used by NASA as grow lights for plants in space in the 1990s. The LEDs were ten times brighter than the sun, so they sped up plant cell metabolism and photosynthesis.

A big problem for astronauts is that wounds heal slowly in space. In the late 1990s, someone got the bright idea to try red LEDs on human skin. Sure enough, they discovered that red light helped human cells grow faster. This led to testing red light as a treatment for damaged and irritated skin caused by acne, rosacea, psoriasis, age spots, wrinkles, and even cancer.

LED Light Therapy

BioLong Usage

  • Recommend using Galvanic Current (+,-) 1 to 3 times a week for no more than 30 minutes each time.
  • LED Light Therapy can be used 7 days a week.
  • To see your results happening, we recommend starting with one side of your face and then the other half.
  • All functions can be combined or used separately.

When combined, use them in the following order:

  1. Positive Galvanic Ion (+) with Sonic
  2. Negative Galvanic Ion (-) with Sonic
  3. Photon (LED Light Therapy)

BioLong Usage

About The Device

  • The BioLong is not battery operated and must be plugged in.
  • Every 5 seconds the device beeps; this is its way of reminding you to move on to a new section.
  • The device must touch your skin and have full contact to work with all settings.
  • Always set your intensity level (high, medium, low) when using Galvanic Current or Sonic functions.

Quick Cheat Sheet

Positive Galvanic Ion (+) = Cleansing Method

Negative Galvanic Ion (-) = Anti-Aging Method

Sonic = Tighten & Toning; can be combined with both Positive Galvanic Ion (+) and Negative Galvanic Ion (-) methods

Photon = LED Light Therapy; Red, Blue, and Combination

When Using…

Galvanic Current

  • To create the bioelectrical field, make sure your finger is always touching the electrode (the metal line along the side of the handle).
  • Your face must be wet while using both Galvanic Ion (+ and -) Currents.


  • To test that the Sonic Function is working, choose the intensity then add a few drops of water to the device, and it should immediately bubble and mist up.

LED Light Therapy

  • The LED Light functions do not require your face to be wet.
  • Close your eyes when the light is near them or wear the goggles that are provided.
  • To help with puffiness and dark circles, you can stimulate circulation by using the red light around the eyes.


  • For the best results, massage the device in a circular upward motion.
  • Once the beep is heard use a light sweeping motion back to the starting point and ladder up the face.
  • Under the eyes, apply the device in a circular motion downwards and lightly sweep it back up.

BioLong Massage Directions


Positive Galvanic Ion

Positive Galvanic Ion (+) = Cleansing Method

Step 1: Cleanse the face with a facial cleanser, then rinse off any remaining product. Once the device is working, the facial skin needs to stay wet at all times.

Step 2: Set the device’s function to Positive Ions with Sonic (option). Make sure your thumb has contact with the electrode at all times (the metal line along the backside of the handle).

Step 3: Set the Positive Ion (+) function and choose the intensity.

Press once – Low | Press twice – Medium | Press three times – High | Press four times – Switches off

Step 4: Using a wet cotton pad, make sure the area the device is touching is constantly wet. Use a wet cotton pad to dab the area as you go.

Step 5: Apply the device to the target areas. Motions will differ depending on the section of the face.

Step 6: Rinse the face with lukewarm water and a cleanser to remove all impurities and notice the skin is cleaner.

Negative Galvanic Ion (-) = Anti-Aging Method

Step 1: Apply product depending on the type of skin care routine (morning/night).

Step 2: Set the device’s function to Negative Ion (-) with Sonic (option) and choose the intensity. Make sure your thumb has contact with the electrode at all times (the metal line along the backside of the handle).

Step 3: Apply the device to the target areas until the product is fully absorbed. Motions will differ depending on the section of the face.

Anti Aging Method

Photon = LED Light Therapy

Step 1: Press the Photon function and choose the preferred LED light therapy setting.

Press once – Red Light Therapy: Anti-Aging Treatment

Press twice – Blue Light Therapy – Oily and Sensitive Skin Treatment

Press three times – Red & Blue Light Therapy: Problematic Skin Treatment

* Goggles may be applied for eye-protection.

Step 2: Apply the device to the target areas by slowly moving the device across the face in order to pass the light (do not glide).

Helpful Videos